**Introduction
to the Geocubic Model
**

by Tom Gilmore

Copyright 2017

All graphics by Tom Gilmore**
**Index of all Articles

**The
Grand Unification Theory**

Academia is so far behind that they still expect the anticipated unification
of the basic forces to be a theory (the Grand Unification Theory), not
realizing the consolidation of the known forces must be a coherent **model**,
and be consistent with scientifically established facts.

These basic forces are conventionally labeled:

**Strong Atomic Force
Time
Weak Atomic Force
Gravity
Electromagnetism**

This website presents a unified model deduced from and corroborated by the
accumulated technical data gathered by scientific experimentation. The 5 basic forces are interconnected and
explained by the Geocubic Model. The
term **Geocubic** is derived from the **cubic** **geo**metry that is the primary
basis for the model.

The Geocubic Model is based on the **cube** and the **sphere**,
and additionally on the **helix spiral**.

**The
Cube:**** ****Space/Time
& Atomic Containment**

The
basis of the Geocubic Model is that space consists of a **matrix of unit cubes**,
formed from equally spaced force planes.
The 3 mutually perpendicular stacks of impenetrable force planes combine
to enclose a matrix of unit-cubes, as diagrammed above. The matrix is the **Strong Atomic Force**
providing atomic containment.

The
matrix of force planes is rapidly **flashing **in and out of existence
at a constant rate. Thus, the force of **Time
**is actually the sequential flashing of the Strong Atomic Force (the
Geocubic Matrix).

In
a vacuum light is propagating by jumping between adjacent unit-cubes of the
matrix during each flash out of existence, so

**speed of light = ****flashing-rate ****x ****size
of the unit-cube**.

Sub-light motion is regulated by momentum, which operates as a building of
fractional energy resulting in quantum jumps.
For example, an object moving at 1/5 the speed of light is jumping one
cube every 5 flashes.

**The Sphere:**** ****Weak Atomic Force & Gravity**

In the Geocubic Model the **Weak
Atomic Force **is a **spherical
force field** compressed inside the unit cube. The compressed sphere is a closed force
surface that serves to keep the oppositely charged Proton and Electron apart in
the atom. There is one of these spheres
for each Proton/Electron pair, isolating each Proton. Even as electricity flows through a
conductive atom, the multiple passing electrons are kept outside the sphere
surfaces, away from the positively charged Protons inside the spheres.

**Gravity** is an
inverse force projected into space as a result of the **compression** of the
force-surface of the spheres. The sphere
would be at equilibrium (with zero-force) at a volume of 1, but a sphere can
never have an exact volume of 1 because the circumference relates to the volume
by the transcendent number Pi.

In forming the Proton/Electron particle pairs, a sphere of minimal force (the Neutrino) is compressed into a unit-cube. As diagrammed above, a sphere of volume ~1 has a diameter of ~1.239, and must be compressed to fit inside a unit-cube (a unit-cube has a diameter of 1). When the sphere compresses to a diameter of 1, the volume is reduced to ~0.52359, which projects an inverse spherical force to a volume of (~1/0.52359=1.90898), which has a diameter of ~1.539. The diagram above is a simplified illustration of the projection of the gravitational field. As atomic number (number of Protons) increases, the number of corresponding compressed spheres increases, and the compression of the individual spheres increases (because the unit-cube does not stretch), generating increased gravity.

The Helium atom has 2 proton/electron pairs, and 2 compressed Spheres, as
illustrated below. The Electrons spin on
the surface of the Spheres. The spin is
related to the helix spiral of **Electromagnetic**
radiation.

The geometric form of the Photon Spin is a
rotating sine-wave (a helix spiral) that defines the surface of a **cylinder.** A
cylinder is formed from a **sphere** in linear motion.

Isotope Balance Formula
– 2P +P^{2}/156

+ Isotope Abundance & Beta Decay
Charts

**The
3-D Periodic Table ****(2-8-5)**

** (2)** The
periodic table begins with a pair **(2)** of Elements (Hydrogen and Helium)
that exhibit the duality of active and inert.

**(2-8):** Following this are **(2)** octaves **(8)** of
Elements that exhibit an expanded duality of active and inert (7 active and 1
inert).

**(2-8-5):** Following this are 2 sets of 2 more of the
same octaves as the first 2 octaves except that after the second **(2)** Element in
each octave **(8)**, additional Elements
in sub-groups of **(5)** are inserted.
These sets of 5 occur as 3 groups of 10 (2x5), and 2 groups of 15 (3x5),
both adding to 30 each, except that at Element 57 the first group of 15
intercepts and replaces the first Element of the third group of 10, reducing
the third group of 10 down to 9. To show
this pattern correctly requires a 3 dimensional approach to the periodic table,
as shown below.

The first intercepting group of 15 (Elements 57 to 71) are called the
Lanthanides, and are centered on Element 64 (4x4x4). The second set of 15 is centered on 96 (**3/2** of 64).

**The
Special Groups**

There are clear periodic relationships of valences (and some physical
properties) between some Elements aligned on the periodic table, in particular
the 3 columns of inert (zero valence) at far-right, halogen (-1 valence) at
second column from right, and alkali (+1 valence) at far-left.

A – The “Stair-Step” separates the metals (left) from the non-metals
(right).

B – The magnetic group. Iron(26) is the most magnetic, followed by Nickel(28).

C – The “Coinage Group”. Copper(29), Silver((47), and Gold(79).

D – The Platinum Group are “noble” metals, meaning
that in bulk they resist oxidation.

E – The Refractory Group resist infusion from other
metals.

**The Geocubic Books**